DSL Digital water level controller with volt and amp meter with HV LV OL DRY PROTECTION
![](https://manthanautomation.in/wp-content/uploads/2022/10/Single-Phase-Digital-Motor-Starter-with-water-level-controller.jpg)
Type: Water Level Controller
Sub Type: Single phase
Weight: 0.80 KG
Manufacturer: Manthan Automation
Warranty: 1 Year Manufacturer.
Item Specifications:
Condition: A brand new unused, undamaged item that is fully operational and functions as intended.
Warranty: 1 Year Manufacturer.
Warranty Service: Repair or Replacement.
![](https://manthanautomation.in/wp-content/uploads/2022/10/Single-Phase-Digital-Motor-Starter-with-water-level-controller.jpg)
![](https://manthanautomation.in/wp-content/uploads/2022/09/stacked-moving-cardboard-boxes-against-white-wall-scaled.jpg)
Package Contain:
- 1 Water Level Controller Unit.
- 6 S.S Sensors.
- 1 user manual with technical details.
Product Descriptions
Micro controller based Digital Water Level Controller.
Digital Volt and ampere meter are provided to see system voltage and load current accordingly.
Overload Protection,
High & Low Voltage protection,
Current based dry run protection,
Water level indications for both tanks.
Adjustable overload.
Adjustable Dry run current.
Water level controller and water level indication for overhead and underground tank.
Suitable for motor up to 3 HP
It has current based dry run protection. If motor runs without water, then it takes lower ampere (current) then actual current. so, when motor current down from actual current, it stops the motor and protect motor from dry running.
User can bypass the protection.
Working:
This model automatically switches ON and switch OFF Motor.
When water level of overhead tank becomes low means water get down from middle sensor and if water is present in the underground tank or sump, motor get start automatically. The tank starts filling up. when the water level reaches to the higher level, the motor automatically gets switched off.
AUTO OFF WHEN TANK IS FULL OR SUMP IS EMPTY.
This model has dry run protection, so it only starts motor if water present in underground tank or sump.
Suitable for 0.1 HP to 3.0 HP Motor, Protect motor from dry running.
Motor ON OFF LED indication provided.
Water Level indication provided for both tanks.
Supply voltage: 220-270 V AC,
Relay: 40 A
Sensing element: it is free from oxidation, long life. Any conducting wire can be used for sensor.
Auto and Manual mode switch available. In auto mode motor start and stop automatically. In manual mode user can start and stop motor by pressing start and stop button of controller. No additional wiring requires to operate motor manually.
Also Suitable for MCB Starter panel and submersible motor, see diagram above for connection.
High quality ABS. enclosure provided.
Fully automatic, controls from underground tank to overhead tank so no manpower required. Long service Life.
All signals pass in sensors through the AC filter circuit that improve life of sensor,
Isolated supply provided
Sensor fault detection provided, if sensor got failed LED start blinking
Electrolysis free design
Our offered controller is manufactured by our adroit professionals using quality tested components and modern technology. we kindly request buyers to communicate with us if there are any issue. we will help to solve all of your issue. Every care is taken for packing so that the item reaches to the buyer safely and undamaged.